Audio Solutions AS-FM3260 - Manual (Page 10)

10
SteP 7
NOTE: Angle adjustment should be done by at least two people.
•
(A) While another person is holding the television assembly, loosen the two screws on either side of
the mounting plate and tilt the television up to 5 degrees back or 15 degrees forward. Tighten the
screws when the desired angle is achieved.
• (B) With assistance, adjust the main cantilever bracket to move the television out from the wall and
angle up to 45 degrees either left or right. Pay attention to wiring to ensure wires are not damaged
during angle adjustment. See Figure 8.
A
B
Figure 8 - Adjust Angle
INStAllAtION