Installation, Ab c – Audio Solutions FM2642 User Manual
Page 10
Advertising
10
SteP 5
NOTE: Angle adjustment should be done by at least two people.
•
(A) With assistance, adjust the bracket arm at the joint nearest the wall up to 170 degrees or at the
middle joint up to 360 degrees. Pay attention to wiring to ensure wires are not damaged during angle
adjustment. See Figure 9.
•
(B) With assistance, swivel the television left/right up to 90 degrees. See Figure 9.
•
(C) While another person is holding the television assembly, loosen the handles on either side of
the mounting bracket to tilt the television up to 5 degrees back or 30 degrees forward. Tighten the
handles when the desired angle is achieved. See Figure 9.
A
B
C
Figure 9 - Adjust Angle
INStAllAtION
Advertising