AVUE AV760EH – 700TVL IP66 IR Bullet Camera with WDR, Smart IR, OSD - Manual

1
3
2
4
5
6
8 7
9
11
10
700 TV Line 700 TV Line
AV760 EH adopts advanced image processing technology.Resolution is as 700 TV L
DESCRIPTION
Thank you for your purchasing this product. Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
AV760
EH
inside 3 axis bracket,full angle adjustment,easy operation.
Video motion detection function, blue highlight LED, good alarm effect.
DC12V and AC24V, which can automatically shift to the correct model as per the power in.
Waterproof ,dust proof and vandalproof
1. Use the Appropriate Power Supply
The input power for
is DC12V/AC24V. Be sure to connect it to the appropriate power.
Wrong connection may cause malfunction and/or damage to the video camera.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside.
Ask a qualified service person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper
handling or storage.
4. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
Do not place the camera in the following locations:
Locations where temperature is lower than -10 C or higher than 50 C;
Locations where humidity is higher than 95%;
Locations where there are large amounts of water vapor and steam.
AV760 EH
PRECAUTIONS
FEATURES
PARTS INSTRUCTION
5. Clean the CCD faceplate with care
When cleaning the CCD panel, do not use strong or abrasive detergents. Use a piece of lens
cotton tipped applicator tissue or and ethanol.
6. Do not attempt to aim the camera at the sun
Do not attempt to aim the camera at the sun or other extremely bright objects that cause smear
to appear irrespective of whether the camera is operating or not. This can damage the CCD
(Charge Coupled Device).
7. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication device which
strong electromagnetic field, emits some irregularity such as noise on monitor screen may happen.
Horizontal 700TVL resolution
Design,whose brightness is several times higher
and working life longer than an ordinary LED's.
It can automatically detect stronglight, keep out the part with strong light in the
image to improve the whole scene definition and carry out an effective mornitoring
more clearly
Advanced WDR compensation largely improves image effect when there is
much contrast.
High Resolution
HS-BLC
Advanced Digital Signal Processing Technology
DC12V/AC24 Duplicate Supply Design
Waterproof and vandalproof
Motion detection
3 axis bracket
1. Hood
2. Camera body
3. Back cover
4. 3 axis bracket
5. Four install screws holes
(at bottom of the bracket)
1/3" SONY CCD is Employed Exview