Dynex DX-PDVD7 - Manual (Page 11)

Advanced setup 11
Removing discs from the player
To remove a disc from the player:
1 Press the OPEN button to open the disc tray, then remove the disc.
2 Press the OPEN button to close the disc tray, then turn off the player.
Using with headphones
You can also use the player with headphones (optional) by plugging the headphones into the
headphone jack on the left side of the player. Plugging headphones into the headphone jack
disables the internal speakers.
Warning: To avoid damaging your hearing, set the volume to a low level before putting on
the headphones, then adjust the volume up to a comfortable level.
Advanced setup
Making optional connections
Connecting to a TV or another monitor
To connect to a TV or another monitor:
• Connect black mini-plug to the AV OUT jack on the DVD player.
• Connect the yellow plug to the VIDEO IN jack on the TV.
• Connect the red plug to the AUDIO IN R jack on the TV.
• Connect white plug to the AUDIO IN L jack on the TV.
Connecting to TV and amplifier
To connect to a TV and amplifier:
• Connect black mini-plug to the AV OUT jack on the DVD player.
• Connect the yellow plug to the VIDEO IN jack on the TV.
• Connect the red plug to the AUDIO IN R jack on the amplifier.
• Connect white plug to the AUDIO IN L jack on the amplifier.
DC 9V CHG AV OUT VOL. OFF ON
Video - Yellow
Audio (L) - White
Audio (R) - Red