AXING SKT 2-01 - Manual (Page 15)

Programming
SKT-2-01
© AXING AG – state of the art: July 2012 – Reserving change in design and type Page 15
4.10 Other functions
Additional settings can be made without
starting the main menu.
Following described settings can only be done,
if all menus are closed.
Setting the audio level
The audio level on the A/V output can be
adjusted using the VOL / VOL keys.
Fig. 29 Setting the audio level
Change program
The program list is loaded by means of the
“EPG” key.
Fig. 30 Channel list
The desired program can be selected from the
list by means of the CH /CH keys.
Press the “OK” key to apply the program.
Additional program information can be loaded
by means of the “INFO” key.
Display quality of input signal
By pressing of "F1" button BER will be shown.
Abb. 31 Displaying of BER
Displaying of BER can be closed by pressing
"EXIT".
Setting of output channel
By pressing of the "UHF"-button a point
appears in the 7 segment display.
By CH /CH keys the designated output
chanel can be selected.
By pressing the OK button the channel will be
transmitted.
!