Bem Wireless Mobile Speaker - Manual (Page 4)

6 7
Power on / Power off
Press the power button to turn on the Mobile Speaker. The
Bluetooth©
indicator will light up to signify the unit is on and ready
to be paired. Press the power button again to turn off the unit and
the Bluetooth©
indicator light will go out.
Play modes
Bluetooth mode: play an audio signal from the connected Bluetooth©
device.
AUX mode: play an audio signal from the connected "wired" device.
Please note, if an Aux cable is connected to the speaker it will not
play music from Bluetooth© connected devices.
Audio Use
Follow the above connection steps to pair a Bluetooth© device
with the Mobile Speaker. At this point you can send any kind of
audio signal to your speaker (music, video, gaming, etc.). Just use
your device as normal and the audio will play through your Mobile
Speaker.
Controls
Press the Play/Pause button to play or pause the music when using a
music player through your Bluetooth© connected device
Operation Details
Pressing the + and - buttons will increase or decrease the volume on
the Mobile speaker. Please note that this will not effect the volume
levels on the connected device.
Connection
Laptop / notebook / PC
As the Bluetooth© versions for these types of devices varies greatly,
the connection methods will differ as well. If you can not connect
with the Mobile Speaker using the previous method instructed you
may need to install a new version of the Bluetooth© driver. Please
reference the instructions of device for details.
AUX out
The Mobile Speaker can also be used as a "bridge" to wirelessly
connect you devices to other speakers not enabled with Bluetooth©.
Plug one end of the supplied Aux cable to the “AUX OUT” port in the
back of unit and plug the other end of the cable to an “AUX IN” or
"Line In" port on any other speaker system
Please note, volume + & volume - on the Mobile Speaker lose function
on this occasion and only the connected Bluetooth© device or the
connected speaker itself can control the volume.
Charging
Connect the standard USB end of the supplied USB cable to a USB
power source (PC, USB power adapter…etc.)