Bem Wireless Outlet Speaker - Manual (Page 4)

6 7
Power on / Power off
Press the power button to turn the Outlet Speaker on. The
Bluetooth©
indicator will light up to signify the unit is on and ready
to be paired. Press the power button again to turn off the unit and
the Bluetooth©
indicator light will go out.
Please note, if the unit is not being used after 5 minutes the Outlet
Speaker will automatically shut down to save battery power.
Play modes
Bluetooth mode: play an audio signal from the connected Bluetooth©
device.
AUX mode: play an audio signal from the connected "wired" device.
Please note, if an Aux cable is connected to the speaker it will not
play music from Bluetooth© connected devices.
Audio Use
Follow the above connection steps to pair a Bluetooth© device with
the Outlet Speaker. At this point you can send any kind of audio
signal to your speaker (music, video, gaming, etc.). Just use your
device as normal and the audio will play through your Outlet Speaker.
Controls
Controlling the volume, play and pause of your audio signal is done
completely through your connected device. There are no controls on
the Outlet Speaker.
Operation Details
Connection
Laptop / notebook / PC
As the Bluetooth© versions for these types of devices varies greatly,
the connection methods will differ as well. If you can not connect
with the Outlet Speaker using the previous method instructed you
may need to install a new version of the Bluetooth© driver. Please
reference the instructions of device for details.
AUX out
The Outlet Speaker can also be used as a "bridge" to wirelessly
connect you devices to other speakers not enabled with Bluetooth©.
Plug one end of the supplied Aux cable to the “AUX OUT” port in the
back of unit and plug the other end of the cable to an “AUX IN” or
"Line In" port on any other speaker system
USB charge
The Outlet Speaker can also be used to charge your iPhone, iPad,
Smartphone, Tablet or other USB chargeable devices.
1. Plug the speaker into wall outlet.
2. Press the power button to turn the speaker on.
3. Plug one end of a USB charging cable (not included) into the USB
port on the unit.
4. Plug the other end of the cable into your chargeable device to
begin charging the connected device.