Brennenstuhl Garant S Bretec FI IP44 cable reel 40m H07RN-F 3G1,5 User Manual
Page 8
Directions for use
1. Engage a qualified electrician to connect the safety
plug to the appliance or extension cable in place of
the normal plug, in accordance with the applicable
regulations.
Ensure without fail that the green/yellow lead is
connected to the screw marked with the
earth
symbol.
2. Plug the safety plug directly into a wall socket only.
Before doing so, switch off the connected electrical
appliance.
3. Switch on the safety plug by pressing the RESET
button. A red indicator must appear in the window
above the RESET button.
4. Now carry out a function test by pressing the TEST
button. A distinct switching noise must be heard
and the red indicator must disappear.
5. The safety plug must not be used if the switching
noise is not heard and the red indicator continues
to appear in the window.
6. If the test proves successful, press the RESET
button again. The safety plug is now ready for use.
Note:
From time to time, carry out a function test, press
the Test button and perform the procedure de-
scribed above.
After a power cut, switch on the safety plug
again.
The safety plug is not suitable for appliances
which may give rise to consequential damage if
disconnected from the power supply for a
prolonged period of time (e.g. refrigerators,
freezers, etc.).
8
025905 BDI-S 30 3210 (Schuko)_025905 BDI-S 30 3210 Schuk