Brennenstuhl Solar LED External Light SOL 14 plus IP44 with PIR sensor 2xLED 0,5W 85lm Cable length 3m Colour Grey white - Manual (Page 12)

12
Solar LED outdoor lamp SOL 14 PLUS
TROUBLESHOOTING
Problem: Light does not activate when there is motion in the monitored area.
Possible Solutions: Make sure that:
• The switch is in the “AUTO” position.
• The LUX-selector dial is not set too far in toward (  ).
• The motion detector is set such that movements can be detected.
• The solar cell is aimed so that it can receive as much direct sunlight as possible during
the day.
• The battery’s charge is not insufficient (charge for 3-4 sunny days with the switch set
to OFF).
• The solar collector is not installed too close to light sources that burn at night, such as
street lamps.
• If the rechargeable batteries need to be replaced
Problem: Light comes on during the day.
Possible Solutions: Make sure that the LUX-selector dial is not set too far toward (  ).
Problem: Light flickers.
Possible Solution:
• Weak battery. Charge the solar light for 3-4 sunny days, during which the switch must
be set to OFF.
Problem
Light activates for no apparent reason.
Possible Solutions
• The LUX-selector dial could be set too far toward (

).
• Trees, vehicular traffic, house pets or birds may have come into the monitored area. You
may need to re-aim the motion detector.
• If there are reflective objects such as windows, water or white walls in the monitored
area, you may need to re-aim the motion detector.
015109 Solar-Aussenleuchte SOL 14_015109 Solar-Aussenleuchte SOL 14 Bed.-Anl. 05.12.12 17:22 Seite 12