CIRCUTOR Wi-beee Series - Manual (Page 6)

6
1
Ins
tructions
1. Remove the protective panel.
2. Install the device, be careful
with the neutral terminal (N)
this one must correspond with
the neutral cable of your ins-
tallation (your device could be
damaged if a bad installation is
made).
3. Put the magnetics connectors in
direction to circuit breaker.
Before using Wi-beee ensure that the con-
ditions are the appropriate for working,
and that the protection equipment is the
adequate.
4. Press the device to ensure the engage.
5. Put the conductor of each line close to the Wi-
beee body.