Draytek DUAL-WAN SECURITY ROUTER VIGOR2910 - Manual (Page 126)

Vigor2910 Series User’s Guide 122
3 3 . . 1 1 0 0 . . 4 4 S S t t a a t t u u s s
On VoIP call status, you can find codec, connection and other important call status for VoIP
1/2 ports.
Refresh Seconds Specify the interval of refresh time to obtain the latest VoIP
calling information. The information will update immediately
when the Refresh button is clicked.
Port It shows current connection status for the port of VoIP1,
VoIP2, ISDN1 and ISDN2. The ISDN1/2 appears only when
the router is equipped with ISDN interface. ISDN1 means D
channel for the physical ISDN port; ISDN2 means D+2B
channel for the physical ISDN port. Be aware that ISDN1/2
port is available for the users living in Europe and using Vigor
2910VGi only. For other users, only the status for VoIP1 and
VoIP2 will be shown in this page.
Status It shows the VoIP connection status.
IDLE - Indicates that the VoIP function is idle.
HANG_UP - Indicates that the connection is not established
(busy tone).
CONNECTING - Indicates that the user is calling out.
WAIT_ANS - Indicates that a connection is launched and
waiting for remote user’s answer.
ALERTING - Indicates that a call is coming.
ACTIVE-Indicates that the VoIP connection is launched.
Codec Indicates the voice codec employed by present channel.
PeerID The present in-call or out-call peer ID (the format may be IP
or Domain).
Connect Time The format is represented as seconds.