CIRCUTOR ReadWatt Series - Manual (Page 8)

3.2.- INSTALLATION
The unit is installed on the energy meter.
The first step for installing ReadWatt is to separate the two parts of the Velcro strap. Take one
of them, remove the protective paper and stick the adhesive part of the Velcro strap to the
rear of the unit ( Figure 1 ).
Figure 1: Stick part of the Velcro strap to the rear of the READWATT�
Remove the protective paper from the other part of the Velcro strap and stick the adhesive
part to the optical port of the billing meter ( Figure 2 ).
Figure 2: Stick a part of the Velcro strap to the optical port of the meter�
8
ReadWatt
Instruction Manual