CONTA-CLIP GSM-PRO - Manual

CONTA-ELECTRONICS ===== = = = = = = = = =
GSM GSM GSM GSM----PRO PRO PRO PRO
=
===== ===== ===== =====GSM controllable I GSM controllable I GSM controllable I GSM controllable I////O module O module O module O module
Further information: www.conta-clip.com Cat. No.: 95121.5 Further information: www.conta-clip.com
Electrical specifications Electrical specifications Electrical specifications Electrical specifications Quick Start Guide Quick Start Guide Quick Start Guide Quick Start Guide
=
=
=
=
The GSM-PRO is a compact remote telemetry and control
system.
The various I/Os are monitored and controlled by SMS / E-
mail communication through the GSM network.
Every defined input status change (digital) or reached level
(analog) sends a SMS / E-mail notification to a selected
group of users. The outputs are set by simply sending an
SMS to the GSM-PRO.
I/Os are defined by an easy to use PC configuration
program.
=
=
Order Information Order Information Order Information Order Information
type
Cat. no.
Weight
Input / Output Data Input / Output Data Input / Output Data Input / Output Data * of measured value
8 multifunctional analog / dig. inputs
resolution / accuracy (0..10V)
input resistance (0..10V)
input current digital inputs (typ.)
UI minimal pulse length
input threshold digital Inputs
4 relay outputs
rated / inrush current (Ohmic load)
max. power rating
life span @ Ohmic load
max. switching frequency
contact material / test voltage
GSM Data GSM Data GSM Data GSM Data
Frequency
Sensitivity
Transmit power
Antenna
General Data General Data General Data General Data
module power supply
module current (max)
Reference out
Power Backup
operating / storage temperature
Max. relative humidity
CE marking
conductor cross section / strip length
mounting / installation position
module size LxWxH (TS 35 / direct)
insulating material / flammability class
protection degree (DIN 40050)
installation guidelines
Accessories Accessories Accessories Accessories
GSM antenna
Cat.no.
Cat.no. Cat.no. Cat.no.
GSM external antenna
Cat.no.
Cat.no. Cat.no. Cat.no.
USB programming cable
Cat.no.
Cat.no. Cat.no. Cat.no.
GSM-PRO.dab.xls 25-11-2011
GSM-USB-cable
16101.2 16101.2 16101.2 16101.2
GSM-antenna-external-SMA-2,5m
16103.2 16103.2 16103.2 16103.2
GSM-antenna
16061.2 16061.2 16061.2 16061.2
0,2 - 2,5 mm² screw clamp connection / 6mm
DIN-rail TS35 or direct mounting / any
88 x 95 x 60 / 58 mm (without antenna)
for mounting-, wiring- and installation instructions, see Manual
IP 20
0..10V / 24VDC (4..30VDC)
Electrical: at max. load: > 1,5 x 10 5 cycles. Mechanical: 15 x 10 6 cycles
50 Ohm impedance, SMA connector
Class 4 (2W@850/900 MHz), Class 1 (1W@1800/1900 MHz)
Low < 2V / High > 4V
5A / 5 A
4 x CO Contact, 250 V ~
AgNi / 4kV
6 min -1 at rated current, 1200 min -1 at no load
@10V: 0,3mA / @24V: 0,8mA / @30V: 1,0mA
10..30V DC
850/900/1800/1900 MHz
R&TTE 1999/5/EC according requirements ETSI EN 301-511 V9.0.2
EMC Directive 2004/108/EC, according requirements of EN 55011 and EN 61326-1
–108 dBm @ 850/900MHz / -107dBm @ 1800/1900MHz (typical)
275 mA DC @ 24V DC
80%, non condensing
Internal maintenance free supercap
4,7V ±10% / 20mA
16099.2
Housing: noryl. Terminals: polyamid 6.6 V0 / UL94-V0
800ms (while not transmitting)
GSM-PRO
Low Voltage Directive (LVD) 2006/95/EC, according requirements of EN 50178
-20°C…+50°C / -20°C…+70°C
1200VA at 240V AC, 5A
20mV / ±(20mV+0,3%*)
46kOhm
275gr
=
=
=
Features: Features: Features: Features:
• 8 multi-functional analog/digital inputs: 0..10V, 24VDC
• 4 relay outputs CO contact 250V/5A
• LED status indication for all I/Os
• SMS / E-mail status report for all I/Os
• SMS control for all outputs
• SMS / E-mail notification on status change at inputs
• SMS notification on power loss
• SMS / E-mail notification on power up
• Easy to use PC configuration program
GSM-PRO quick start guide rev1 _EN.doc