Part numbers ratings, Ceiling rose / conduit box connection – CP Electronics VITM 6 User Manual

Page 8

Advertising
background image

8

Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.

Modules

VITM6-S

6 pole starter box

VITM6-E

6 pole extender box

VITM6-SL1

6 pole starter box with 1m lead
and ceiling rose connector

VITM6-SD5

Pre-wired corridor module with 5
metres of cable

Presence / Absence Detectors

VITM6-EBDSPIR-DD Direct Dim PIR presence/

absence detector

VITM6-MWS3A-DD

Direct Dim Microwave presence/
absence detector

VITM6-MWS6-DD

Direct Dim Microwave presence/
absence detector

VITM6-EBMPIR-DD

Direct Dim Miniature PIR
presence detector

Accessories

VITM6-SELVMOD

SELV dimming switch module

VITM-ROSE

Ceiling rose module

Connectors

VITM6-LPW

6 pole luminaire plug white

VITM6-LPR

6 pole luminaire plug red

Dual Detector Leads (LSF)

VITM6-LD3-DD

3m Direct Dim sensor lead

Luminaire Leads (LSF)

VITM6L503100W

5 core 3m 1.0mm

2

White plug

VITM6L505100W

5 core 5m 1.0mm

2

White plug

VITM6L603100R

6 core 3m 1.0mm

2

Red plug

VITM6L605100R

6 core 5m 1.0mm

2

Red plug


Other leads available to order.

Part numbers

Ratings

Voltage

230VAC +/- 10%

Frequency

50Hz

Terminal capacity 4mm

2

in wiring compartment

Temperature

0ºC to 35ºC

Power

Rating of system 16A. Rating of each output 10A

VITM6-SELVMOD—control of up to 20 ballasts

Compliance

BS 5733:1995

For lighting purposes only with suitable circuit protection. For fixed wiring only

C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:

+ 44 (0) 333 900 0671

Fax:

+ 44 (0) 333 900 0674

www.cpelectronics.co.uk
[email protected]

IMPORTANT NOTICE!
This device should be installed by a
qualified electrician in accordance with
the latest edition of the IEE wiring
regulations.

Ref: #WD290 Issue 6

Conduit box to VITM6-S mains wiring

Ceiling rose / conduit box connection

Use a VITM-ROSE when there is a need to take power from a conduit box. Plug
the connector into the VITM-ROSE and wire the other end of the lead into the
terminals of the VITM6-S. A pre-wired version is available, VITM6-SL1.

Screw fixings to conduit box

UK Patent no. GB2463063

EU patent pending

EU registered design no.

001587544-0001, 001587544-0002

Live supply

Earth
Neutral

Permanent
Live

VITM-ROSE mains wiring

VITM-ROSE connector wiring

Each pole has two screw terminals.

Each terminal accepts 1 x 2.5mm

2

Live supply

Neutral
Permanent Live

Earth

Advertising
This manual is related to the following products: