CP Electronics EBDSPIR-IP - Manual

The EBDSPIR series of presence detector switches are designed to provide automatic control of light-
ing, heating or ventilation loads. They detect movement using a PIR sensor and turn the load on.
When an area is no longer occupied the load will switch off after an adjustable time out period.
An adjustable internal light sensor provides additional energy saving in lighting applications. When an
area is occupied lighting is only switched on when the level of natural light is below a preset level.
When the unit is first powered up the PIR sensor will always detect immediately regardless of whether
the room is occupied.
The /IP variant of these products is sealed to IP55 when installed flush in a ceiling.
Overview
Product Guide
EBDSPIR/IP
Ceiling Presence Detector Sealed IP55