CP Electronics EBMPIR User Manual

Ebmpir, Standard & slim-line psu), Product guide

Advertising
background image

Standard power supply

PIR Sensor
Detects movement within the unit’s detection range,
allowing load control in response to changes in occupancy.

IR Receiver
Receives control and programming commands from an
IR (infrared) handset.

Light Level Sensor
Measures the overall light level in the detection area

Status LEDs
The LED flashes Red to indicate the following:

RJ11 connector
The sensor head has a flying lead with a RJ11 plug at the
end plugs into the RJ11 socket on the power supply.

Standard power supply
This power supply has a 6A relay. It also has connections
for an external switch that can be used to turn on the load
when absence detection mode has been set or raised /
lowered with dimming variants.

Slim-line power supply
Where space is at a premium the slim-line power supply is
compact and suitable for luminaire mounting where a 2A
relay is sufficient. This power supply does not have
connections for external switches.

Walk Test LED active

when movement is detected

Valid setting received

Sensor head

Lens

which covers...

IR Receiver

Light Level Sensor

Status LED

Slim-line power supply

Dimming version shown

Dimming version shown

Overview

The EBMPIR series of miniature PIR (passive infrared)
presence detectors provide automatic control of lighting
loads with optional manual control.
Three models are available: premium, direct dim, and
analogue dim all of which will switch incandescent,
fluorescent and compact fluorescent lighting. The direct
dim variant controls DALI or DSI digital dimming ballasts
whilst the analogue dim variant controls 1-10V dimming
ballasts.
The unit detects movement using a PIR sensor and turns
the load on. When an area is no longer occupied the load
will switch off after an adjustable time out period.
A selection of fixing clips to allow the unit to me mounted in
or to the side of a luminaire are available
All functionality is fully programmable using an IR handset.

Features

Miniature PIR Presence Detector (luminaire fitting)

EBMPIR

(standard & slim-line PSU)

Product Guide

PIR lens

Advertising