CRU RTX Secure 410-3QR - Manual

RTX220 QR - Manual
RTX ™ Secure 410-3QR Quick Start Guide
1. Installation Steps
1.1 Hard Drive Installation
a. Pull the ejection handle on the TrayFree bay to open the bay door.
b. Insert a SATA hard drive into the bay. Make sure it is label-side up with the SATA
connection on the drive inserted first toward the rear of the enclosure.
c. Shut the bay door.
d. You can optionally secure each bay door by inserting an RTX Key into its key lock and
turning it 90 degrees clockwise. Doing so is not necessary to operate the RTX Secure.
Sticker Card
Use the stickers on the provided sticker card to label each drive if you plan to use Unique
Encrypted Mode (see Section 1.2). This will prevent the drives from getting mixed up when they
are removed from the bays.
1.2 Setting the Encryption Mode
Before powering on the RTX Secure, insert your Security Key into the Security Key port and select
your desired encryption mode. After the unit has been successfully mounted by the system, the
Security Key may be removed and stored in a safe location. Changing the position of the switches
on the bottom of the RTX after the unit has successfully been mounted will not change the mode
detected at power up.
5. Technical Specifications
Product Name RTX Secure 410-3QR
Compatibility 3.5” SATA hard drives
Interface Types and Speeds USB2 (via USB3 connector): up to 480 Mbps
USB3: up to 3.2 Gbps
eSATA: up to 3 Gbps
FireWire 800: up to 800 Mbps
Power Switch 2 position: On / Off
Power Supply Input: 100-240VAC, Output: 120 Watts
Compliance EMI Standard: FCC Part 15 Class A, CE. EMC Standard: EN55022, EN55024
Shipping Weight 22 pounds (without drives), 28 pounds (with drives)
Product Dimensions (274mm x 177mm x 268mm)
Technical Support Contact us at www.cru-dataport.com/support . We also offer phone support at (800)
260-9800 or (360) 816-1800.
RTX is a trademark of CRU Acquisitions Group, LLC. Other marks are the property of their respective owners. © 2012 CRU Acquisitions Group, LLC. All
rights reserved.
Limited Product Warranty
CRU-DataPort (CRU) warrants RTX to be free of significant defects in material and workmanship for a period of three years from the original date of
purchase. CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but not limited to, the
implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights with respect to the documentation
and hardware. No CRU dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. In no event will CRU
or its suppliers be liable for any costs of procurement of substitute products or services, lost profits, loss of information or data, computer malfunction,
or any other special, indirect, consequential, or incidental damages arising in any way out of the sale of, use of, or inability to use any CRU product or
service, even if CRU has been advised of the possibility of such damages. In no case shall CRU’s liability exceed the actual money paid for the products
at issue. CRU reserves the right to make modifications and additions to this product without notice or taking on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.”
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at this own expense.
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1) Ensure that the case of your attached drive is grounded.
2) Use a data cable with RFI reducing ferrites on each end.
3) Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4) Reorient or relocate the receiving antenna.
A9-410-0005-1 Rev. 1.0
For the full user manual and more information about this product, visit www.cru-dataport.com .
Models Covered:
RTX Secure 410-3QR
FOR OFFICE OR COMMERCIAL USE