CUE sensorCUE - Manual (Page 10)

6. Program module for sensorCUE
For easier programming you can use the module sensorCUE.csm. You can find it on the CUE
Application CD in folder XPL Drivers and Modules.
This module has two functions:
Public Function GetTemperature (PanelAddress As Word, ByRef TemperatureAsText As String) As
Integer
GetTemperature returns current temperature measured in 1/10 degrees of Celsius as integer value (it
allows negative values). Returned values are -550 (-55
°C) to 1250 (+125 °C). The first parameter is
the panel address of sensorCUE-W, the second parameter is string, where temperature value will be
stored as string (“-55.0” to “+125.0”).
Example:
Declarations:
Public TemperatureInt As Integer
Public TemperatureString As String *10
Program:
TemperatureInt = GetTemperature(38, TemperatureString)
This command has assigned the temperature from sensorCUE-W (with the serial number
CS0265.0138) to the TemperatureInt variable. If current temperature is for example +23.5
°C, in
TemperatureInt variable will be value 235. In string TemperatureString will be value “+23.5”.
Public Function GetLight(PanelAddress As Word) As Word
GetLight returns current lighting level as a word value. Returned values are 1 (straight full light) to cca
30000 (dark).
Example:
Declarations:
Public LightLevel As Word
Program:
LightLevel = GetLight(48)
This command has assigned the lighting level from sensorCUE-W (with the serial number
CS0265.0248) to the LightLevel variable.
User Manual sensorCUE
www.cuesystem.com
Page 10 of 14