d&b Y7P - Manual (Page 10)

2.5. Technical specifications
Y7P/Y10P system data
Frequency response (–5 dB standard) 59 Hz - 18 kHz
Frequency response (–5 dB CUT mode) 118 Hz - 18 kHz
Max. sound pressure (1 m, free field)
Y7P with D80/D12/D6
137 dB/135 dB/132 dB
Y10P with D80/D12/D6 136 dB/134 dB/131 dB
(SPLmax peak, pink noise test signal with crest factor of 4)
Input level (100 dB
SPL
/1 m) –17 dBu
Y7P/Y10P loudspeaker
Nominal impedance 8 ohms
Power handling capacity (RMS/peak 10 ms) 400/1600 W
Nominal dispersion angle (horizontal) Y7P 75°
Nominal dispersion angle (horizontal) Y10P 110°
Nominal dispersion angle (vertical) 40°
Components 2 x 8" driver with neodymium magnet
1.4 ” exit compression driver
Passive crossover network
Connections 2 x NLT4 F/M
optional 2 x NL4 M or EP5
Pin assignment NLT4 F/M and NL4 M: 1+/1–
EP5: 1: + / 2: –
Weight 18 kg (40 lb)
Y7P/Y10P cabinet dimensions in mm [inch]
Y7P frequency response, standard and CUT modes
Y10P frequency response, standard and CUT modes
d&b Y7P/Y10P Manual 1.2 en 10