Dan Dugan Sound Design M - Manual (Page 17)

Dugan Model M User Guide Installation
17
Chapter 3: Installation
Rack Mounting
One or two half-rack-sized Dugan controllers can be mounted in a single rack space.
Each unit ships with one long and one short rack ear and one joining plate. Two
units provide the necessary parts for mounting side-by-side.
The rack ears for older half-rack Dugans differ slightly from the current design, but
the joining plates are the same. All half-rack-sized Dugans can be mounted side-by-
side using the appropriate rack ear for each unit.
To rack-mount a single unit, attach one long and one short rack ear, then mount in
the rack.
To mount two units side-by-side:
1. For the left unit, remove the four screws from the right side of the top and
bottom lids.
2. Attach the top and bottom joining plates to the left unit.
3. For the right unit, remove the four screws from the left side of the top and
bottom lids.
4. Attach the top and bottom joining plates to the right unit.
5. Attach the appropriate short rack ears to the left and right units.