Vsn990 led’s – Datapath VSN990 User Manual
Page 14
VSN990 LED’s
The VSN990 and VSN900X have an LED for each PCIe slot and the PICMG1.3 SBC slot.
14
Fig.11
The LED’s indicate the following:
LED1
ON = +5V Standby Voltage present
LED2
ON = +5V supply present
LED3
ON = +12V supply present
LED4
ON = +3.3V supply present
LED5
ON = PICMG link speed = Gen3, FLASH-FAST = Gen2, FLASH-SLOW = Gen1
LED7
ON = PCIe Slot 1 link speed = Gen3, FLASH-FAST = Gen2, FLASH-SLOW = Gen1
LED9
ON = PCIe Slot 2 link speed = Gen3, FLASH-FAST = Gen2, FLASH-SLOW = Gen1
LED10
ON = PCIe Slot 3 link speed = Gen3, FLASH-FAST = Gen2, FLASH-SLOW = Gen1
LED11
ON = PCIe Slot 4 link speed = Gen3, FLASH-FAST = Gen2, FLASH-SLOW = Gen1
LED12
ON = PCIe Slot 5 link speed = Gen3, FLASH-FAST = Gen2, FLASH-SLOW = Gen1
LED13
ON = PCIe Slot 6 link speed = Gen3, FLASH-FAST = Gen2, FLASH-SLOW = Gen1
LED14
ON = PCIe Slot 7 link speed = Gen3, FLASH-FAST = Gen2, FLASH-SLOW = Gen1
LED15
ON = PCIe Slot 8 link speed = Gen3, FLASH-FAST = Gen2, FLASH-SLOW = Gen1
LED16
Not Used
No LED’s flashing indicates that lane width has not been established. The LED’s will not flash on slots
where no cards are installed.