Draytek Vigor 2800 - Manual (Page 28)

22
Step 4 Are the ISP Settings OK?
Click Internet Access Setup group and then check whether the
ISP settings are set correctly.
‹ For PPPoE/PPPoA Users
1. Check that if the Enable option is selected.
2. Verify if all parameters of DSL Modem Settings are entered
with correct value which given by your ISP.
3. Verify if Username and Password are entered with correct
value which given by your ISP.
‹ For MPoA (RFC1483/2684) Users
1. Check that if the Enable option is selected.
2. Verify if all parameters of DSL Modem Settings are entered
with correct value which given by your ISP.
3. Verify if IP Address, Subnet Mask and Gateway are set
correctly, or that your ISP requires using DHCP clients to
obtain IP automatically.