Future Automation PDM - Manual (Page 7)

In
st
all
at
io
n
: S
ta
ge
3
Page 6 of 14 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PDM1, 2 & Custom - Projector Drop Mechanism
Final checks
- Check the mechanism is working correctly
- Make sure the unit is fully out as shown
- Make sure the projector is secure using the range of nuts, bolts and washers provided
- Slide the mounting plate back into the unit and the slide toggles into the key holes x6
- Attach the bottom plate back to the unit using M5 countersunk bolts
Locking nut
MAKE SURE THE BOTTOM
PLATE AND LOCKING PLATE
ARE SAFE AND SECURE
Mounting