Holland Electronics HDD-2U - Manual (Page 3)

3
INSTALLATION AND OPERATION
1. UNPACKING and HANDLING
Each unit is shipped assembled and factory tested.
Ensure that all accessories are removed from the container before discarding packing material
2. MECHANICAL
INSPECTION
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose.
3. THE USE OF RACK MOUNT UNITS AND POWER REQUIREMENTS
The HDD is designed to be mounted in standard 19” EIA racks and to be powered by
AC110V/60Hz power. Using the wrong AC power voltage can damage the HDD.
Contact your distributor for more information.