ILUMINARC Ilumipod™ 18g2 IP - Manual (Page 10)

Installation
6 Ilumipod 18g2 IP Optic RGB User Manual (Rev. 2)
3. Installation
Make sure to
mount this product
away from any
flammable material as
indicated in the
Safety
Notes .
Mounting
Before mounting this product, read and follow the safety recommendations indicated in the
Safety Notes .
Orientation
Always mount this product in a safe position, making sure there is adequate room for
ventilation, configuration, and maintenance.
Installation
The Ilumipod 18g2 IP Optic RGB comes with two adjustable brackets with 3mm slot
openings to mount the product on any firm, non-flammable surface. Once mounted the
angle of the product can also be adjusted and locked into place. ILUMINARC®
recommends following the general guidelines below when mounting the Ilumipod 18g2
IP Optic RGB.
· When selecting an installation location, consider ease of access to the product for
operation, programming adjustments and routine maintenance.
· Make sure the product’s mounting location can support its weight. Please see the
Technical Specifications section of this manual for the weight requirement of this
product.
Procedure
The Ilumipod 18g2 IP Optic RGB comes with a mounting base which connects to the
arm of the product. The mounting plate has 4 6.1-mm holes on the corners to mount the
product in any orientation to almost any firm, non-flammable surface capable of
supporting its weight. You will have to use 4 mounting points per product.