KBC Networks FDVA2-M2T-R-WSC - Manual (Page 9)

Manual-FDVA2-Rev1008.pdf Page 9 of 11 www.kbcnetworks.com
Copyright © KBC Networks Ltd.
－ : Power Supply Ground
• AC:
There is no difference between ＋/－; the power supply can be connected into the
device directly.
FIB1: Fiber Optic ST
FIB2: Fiber Optic ST
GND: Grounded pin
2.4 Caution
• Switch off all power supply before installation
• Ensure fiber is properly aligned to the receiving connector
• Do NOT stare at the fiber core