KLING & FREITAG K&F SEQUENZA 10 W User Manual
Page 30
User's manual
K&F SEQUENZA 10 N/W/B & Flying Frame
KLING & FREITAG GMBH © 2014
Version Version 6.1
Page 30 of 70
10.2.3
Arrays with SEQUENZA 10 N/W exceeding a Length of 5m
This description is valid for arrays that only consist of SEQUENZA 10 N/W systems as well
as for mixed arrays of SEQUENZA 10 N/W and SEQUENZA 10 B whose total length exceeds
5m. (An array with 16 x SEQUENZA 10 N/W corresponds to a length of 5m).
1.
Attach a certified 3.25 ton shackle for every speaker used.
Secure the shackles against self-loosening (i.e. split pin).
2.
When connecting the
SEQUENZA 10 N/W systems,
leave the spring bolts in a vertical
position so that they cannot snap
into place during lifting.
Risk of crushing hands!
The speakers move towards each
other during lifting.
3.
Hook the load hook of the hoist chain (i.e. of the hoist motor) into the load adapter's
shackle and begin to lift the array carefully.
4.
Lift the array up far enough so that
the first speaker enclusures begin to
touch each other.SEQUENZA 10 N/
W