Boot – NEXCOM EBC 355 User Manual
Page 59
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
45
EBC 355 User Manual
Chapter 3: BIOS Setup
Network
Controls the execution of UEFI and legacy PXE OpROM.
Onboard LAN PXE
Enables or disables onboard LAN PXE ROM.
Boot Option Priorities
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.
Boot
This section is used to configure the boot features.
Bootup NumLock State
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of the
numeric keypad is the number keys. When set to Off, the function of the
numeric keypad is the arrow keys.
Fast Boot
When enabled, the BIOS will shorten or skip some check items during POST.
This will decrease the time needed to boot the system.
Save & Exit
Advanced
Chipset
Security
Boot
Main
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select the keyboard NumLock
state
Boot Configuration
Bootup NumLock State
Fast Boot
Network
Onboard LAN PXE
Boot Option Priorities
Boot Option #1
[On]
[Disabled]
[Enabled]
[Disabled]
[UEFI: Built-in EFI . . .]