NEXCOM NEX 604 - Manual (Page 56)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 41 NEX 604 User Manual
Chapter 3: BIOS Setup
H/W Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
CPU Temperature
Detects and displays the current CPU temperature.
System Temperature
Detects and displays the current system temperature.
Fan1 Speed
Detects and displays Fan1 speed.
Parallel Port Configuration
This section is used to configure the parallel port.
Parallel Port
Enables or disables parallel port (LPT/LPTE).
Change Settings
Selects an optimal setting for the Super IO device.
Device Mode
This option specifies the parallel port mode.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Parallel
Port (LPT/LPTE) Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
[Enabled]
IO=3F8h; IRQ=7;
[Auto]
[Standard Parallel ...]
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
PC Health Status
CPU temperature
System temperature
Fan1 Speed
Fan2 Speed
VCC CPU
VCC3
VCC12
VCC5
: +34C
: +24C
: 6196 RPM
: N/A
: +1.168V
: +3.312V
: +12.038V
: +5.068V