Serial port 3 configuration, Serial port 4 configuration – NEXCOM PEAK 886VL2 User Manual
Page 47
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
32
PEAK 886VL2 User Manual
Chapter 3: BIOS Setup
Serial Port 3 Configuration
This section is used to configure serial port 3.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Serial Port 3 Configuration
Serial Port
Device Settings
Change Settings
[Enabled]
IO=3E8h; IRQ=10;
[Auto]
Serial Port 4 Configuration
This section is used to configure serial port 4.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Serial Port 4 Configuration
Serial Port
Device Settings
Change Settings
[Enabled]
IO=2E8h; IRQ=11;
[Auto]