Graphics configuration, Amt configuration – NEXCOM NDiS B533 User Manual
Page 58
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
44
NDiS B533 User Manual
Chapter 4: BIOS Setup
Graphics Configuration
This section is used to configure the graphics parameters.
Advanced
Boot
Security
Save
&
Exit
Main
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select the Video Device which
will be activated during POST.
This has no effect if external
graphics present.
Secondary boot display selection
will appear based on your
selection.
VGA modes will be supported
only on primary display
Primary IGFX Boot Display
Secondary IGFX Boot Display
[HDMI1]
[HDMI2]
Primary IGFX Boot Display
Select the Video Device which will be activated during POST. This has no
effect if external graphics present. Secondary boot display selection will
appear based on your selection. VGA modes will be supported only on
primary display. The options are VBIOS Default, HDM1, HDMI2 and HDMI3.
Secondary IGFX Boot Display
Select the secondary display device, the options are Disabled, HDMI1,
HDMI2 and HDMI3.
AMT Configuration
This section is used to configure Active Management Technology (AMT)
options.
Advanced
Boot
Security
Save
&
Exit
Main
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable Intel (R) Active
Management Technology BIOS
Extension.
Note : iAMT H/W is always
enabled.
This option just controls the
BIOS extension execution.
If enabled, this requires
additional firmware in the SPI
device
Intel AMT
BIOS Hotkey Pressed
MEBx Selection Screen
[Enabled]
[Disabled]
[Disabled]
Intel
®
AMT
Enables or disables Intel
®
Active Management Technology.
BIOS Hotkey Pressed
Enables or disables BIOS hotkey press.
MEBx Selection Screen
Enables or disables MEBx selection screen.