Installing a 2.5” hdd storage – NEXCOM NDiS M324 User Manual
Page 40
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
26
NDiS M324 User Manual
Chapter 3: System Setup
Installing a 2.5” HDD Storage
The system is equipped with a removable 2.5” HDD drive bay. To install a
HDD, please follow the instructions below.
CAUTION!
CAUTION!
CAUTION!
Please correctly follow the below instructions and
noted items to avoid making unnecessary damages.
1. Remove the HDD cover located at the front panel by loosening the screw.
Screw
2. Gently take the cover out.
3. Align the mounting holes on the front of the HDD to the mounting holes
on the cover, then tighten screws on both sides to secure it. Make sure
the connector side of the HDD is facing outwards.
Screw
4. Put the HDD back into the slot gently, then tighten the screw to secure it.