NEXCOM NDiS M532 - Manual (Page 36)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 22 NDiS M532 User Manual
Chapter 3: System Setup
Installing a 2.5” HDD Storage
The system is equipped with a removable 2.5” HDD drive bay. To install a
HDD, please follow the instructions below.
CAUTION! CAUTION! CAUTION!
Please correctly follow the below instructions and
noted items to avoid making unnecessary damages.
1. Remove the HDD cover located at the front panel by loosening the
screw.
Screw
2. Gently take the cover out.
3. Align the mounting holes on the front of the HDD to the mounting
holes on the cover, then tighten screws on both sides to secure it. Make
sure the connector side of the HDD is facing outwards.
Screw