Oklahoma Sound #800x - Manual (Page 4)

aSSemBlY inStructiOnS
Parts
(1) reading desk
(1) Speaker Cabinet
(1) Base Section
(4) 1¼" Phillips Bolts
(4) Phillips Screws
tools required
Phillips-Head Screwdriver.
assembling instructions
1) Place base section (with casters) upside down and line up the bolt holes to
match with speaker cabinet holes. Insert and tighten the four (4) Phillips bolts.
2) Turn cabinet with base right-side up.
3) Insert top reading section into base unit and connect reading light wires.
Top front end should be facing as speakers do.
4) Once all the wiring is properly connected, use the (4) provided screws and attach the
reading surface in place. Screw the (4) screws through the pre-drilled holes located
on the upper portion of both sides of the speaker cabinet. Two on each side.
connection for Optional Battery
White cable from battery cord goes to Positive (+); Brass to Negative (-).
IMPORTANT do not reverse!
Oklahoma Sound orATor LecTern: ModeL 800x
4 5
ASSeMBLY dIAgrAM