Oklahoma Sound 007HT - Manual (Page 4)

O KLAHOMA S OUND C ORPORATION
TECHNICAL SPECIFICATIONS
Power Output 20 Watts
Microphones • Hand-Held Electret Condenser with 9' Cable
• Tie Clip/Lavalier type, with 10' Cable
Speakers Two 4" High Efficiency
Inputs One Mic
Outputs 8 Ohm for additional Speaker and Recording
Controls One Volume; One Tone; On/Off
Fuse Internally Mounted
Power Supply 110 Volt AC; 12V DC* (Batteries not included)
*internal—8 “C” Batteries or External—12V Lantern Battery
Dimensions 18"L x 13"W x 5"H
Reading Table Dimensions 14" x 15"
Weight 9 lbs.
PA-IN-CASE ™
ATTACHE SOUND LECTERN
Manufacturers Warranty
Our Attache Sound Lectern undergoes the most rigid and exacting tests for
superior quality and performance before leaving the factory. Oklahoma
Sound Corporation warrants this product to be free from defective materi-
al and workmanship on the electronic product speakers and microphones
for two years from the date of resale by an authorized Oklahoma Sound
distributor. Oklahoma Sound will replace defective parts and repair mal-
functioning products under this warranty when the defect occurs under
normal installation and use, provided the unit is returned to our factory
via prepaid transportation after direct authorization and approval by
Oklahoma Sound. This warranty provides that examination of the returned
product must disclose in our judgement, a manufacturing defect. This
warranty does not extend to any product which has been subject to misuse,
neglect, accident, improper installation, or where the serial number has
been removed or defected and is given in lieu of any other warranty
implied or expressed and will not cover any consequential damages.
MODEL #007-HT
INSTRUCTION MANUAL