One Systems PM4-M V4 User Manual
Page 7
Installation instructions from BAND-IT should be followed exactly. Operating
instructions are supplied with the tensioning tool. (All BAND-IT parts and tools
must be purchased separately from BAND-IT or from their distributors. These
parts and tools are not supplied by ONE SYSTEMS)
The stainless steel banding material, buckles, and tensioning tools are available
from the following locations (or though distributors recommended by these
locations):
BAND-IT IDEX, Inc.
4799 Dahlia St.
Denver Colorado 80216
USA
1-800-525-0758
FELIX PONCE
Calle Ignacio Zaragonza No. 8
Colonia Ahuehuetes Atizapan 52953
Edo. de Mexico
(52) 555825 8502
BAND-IT Company Limited
Speedwell Industrial Estate
Stavely, Nr. Chesterfield
Derbyshire, S43 3PF England
Home Sales (44) 1246-479479
Export Sales (44) 1246 479480
BAND-IT Clamps (ASIA) Pte. Ltd.
11 Second Chin Bee Road
Singapore 618777
65-62658853
BAND-IT Shanghai Sales Office
207 room
Wanbao International Business Centre
660# Xinhua Road
Shanghai, China 200052
021-62826348-308
1. Next, the loudspeaker bracket (Figure 2) should be mounted to the
loudspeaker (ONE SYSTEMS 112/HTH, 212/HC, 312/HC, 118/HSB or
CFA-2/HTH only using the supplied M10 stainless steel bolts and
washers). DO NOT SUBSTITUE ANY PARTS.
NOTE: See Appendix 2 at
the end of this document, if the 118/HSB is being used!