SMK-Link Electronics Wireless Stopwatch Presenter Remote User Manual
Page 7
Page
your computer. Wait for the computer to go through its default
process of recognizing the new hardware and installing the
built-in native driver. You don’t need to do anything while your
computer is going through the installation of a new device.
Power on the presenter by sliding
the on/off switch to ON position.
The radio frequency (RF) codes
are factory preset for your
convenience; the presenter should
be functional at this point.
If for any reason the presenter
does not function correctly, i.e.
the presentation slides do not
advance to the next page, there
may be other wireless devices in
the vicinity operating in the same radio frequency channel. The
presenter can easily be reset to another channel by pressing once
on the USB receiver dongle’s connect button while it’s plugged
in to the computer’s USB port, followed by pressing once on
•
•
•
Power switch on
the presenter