Thuraya SatSleeve for iPhone - Manual (Page 8)

User Guide | ENGLISH
8
Turning On the Thuraya SatSleeve
Press and hold the power button down for about 2
seconds to power on the Thuraya SatSleeve. The
blue LEDs will blink and you will hear a beeping
sound. The Thuraya SatSleeve is now ready to pair
with your iPhone.
To turn off the SatSleeve, press and hold the power
button down for about 2 seconds until all of the
UHG/('VDUHÀDVKLQJDQG\RXZLOOKHDUDEHHSLQJ
sound.
How to use the SatSleeve
To enable satellite mode on your iPhone, you
will need to pair your iPhone with the Thuraya
SatSleeve via Bluetooth. Follow the below steps to
pair the devices:
1 On your iPhone, go to Settings > Bluetooth >
On to activate Bluetooth on your iPhone.
2 Select e.g. SAT0000000 from the devices list.
3 Check the Bluetooth icon displayed on the
top of your iPhone screen when the pairing is
complete.
4 Open the SatSleeve application.