Check befo, Lighting – Toyotomi RCA-2800 User Manual

Page 6

Advertising
background image

CHECK BEFO

1. LEVEL THE HEATER

The heater should b

NOTE: If your heate

Do not prop

2. ENGAGE THE AUTO

The automatic extin
wick adjuster knob c

NOTE: When it is dif

counterclockw

LIGHTING

NOTE: When you first

garage or an a
remove all of t
done inside, so
THE FIRST TIM

NOTE: If you have fuel

fuel for a long t
saturated.

1. Turn the wick adjust

As the wick rises wi
some resistance and
the wick has reache
fully engages.
The wick adjuster k
the flame.

2. AUTOMATIC LIGHTI

Gently push the igni
the wick.

NOTE: If you have diff

very slightly to
the wick.

3. LIGHTING WITH MA

You should not have
become necessary, o
the wire handle and t
burned parts of the m

NOTE: To restore the

replace worn
replace it.

4. Be sure that heat c

handle left and right
that the heat chamb

Stop
here

Fuel Gauge

Manual shutoff button

Igniter button

Wick adjuster knob

Removable fuel tank

Top plate

Grille

Body

Heat

chamber

Tank lid

Drip tray

Fuel indicator

Front panel

1. Open the fuel tank lid on the top of heater cabinet and lift out the

removable fuel tank. Turn the removable tank upside down and remove
the fuel tank cap.

2. Insert the straight tube of the manual siphon into the kerosene (paraffin)

container. Insert the siphon’s flexible hose into the removable fuel tank
opening.

3. Turn the air vent knob on the top of the siphon clockwise to close the

vent. Start the flow of kerosene (paraffin) by squeezing the bulb of the
siphon vigorously six or seven times. Once flow begins, it is no longer
necessary to squeeze the bulb.

4. Watch the fuel gauge on the removable tank to avoid overfilling.

When it shows half, stop flow by turning the air vent knob
counterclockwise.

NOTE: Be careful to avoid overfilling the tank, especially with very cold

kerosene (paraffin). Overflow might occur due to expansion
when the fuel warms up.

5. Remove the siphon carefully, allowing excess kerosene (paraffin) to drain from the tube back into the

container. replace fuel tank cap and tighten it securely. Be sure to wipe away any spilled kerosene
(paraffin) from tank and other heater parts.

6. After making sure fuel tank cap is tightly fastened, invert tank and replace into heater body.

5

RCA-2800 Type C_US 14.7.10 11:17 ページ 5

Advertising