Transystem 860E User Manual

860e users manual

Advertising
background image

860E Users Manual

Thank you for purchasing 860E 66-Channel GPS Datalogger.

a. Package Content

860E x 1

USB to mini-USB cable x 1

Strap x 1

CD Tool x 1 (Software)

b. Appearance & Led indications.

Blink every 2 seconds = Logging
Always ON = Memory 90% occupied

1. Log/Memory LED (RED)

Blink every 5 seconds = Sleep mode
Blink every 2 seconds = GPS fix
Always ON = Searching for Satellite

2. GPS LED (Orange)

OFF = Sleep mode

3. Battery status LED (Red)

Always ON = Low battery
Always ON = Charging battery

4. Charge status LED (Green)

OFF = Fully charged

5. Power switch

To turn ON/OFF the device

6. USB Port

For power supply and data exchange

c. Hardware function

Built-in MTK II GPS

High performance GPS solution with A-GPS for instant fix less than 15 seconds.

Built-in 32Mb memory

Capacity for up to 125,000 waypoints recording.

Built-in rechargeable Battery

Built-in 350mA Li-polymer battery for up to 11 hours operation time and 90 hours
standby time.

Built-in motion sensor
(This function is turned on as default
and can be turned off by the provided
software.)

For automatically start/ stop logging and smart power management and waypoint
saving.
860E will enter sleep mode when it is static for 2 minutes and recover when motion
is detected.

Built-in Mini USB port

For power charging and data exchange.
Use USB cable to connect to power source to charge the battery.
Connect to PC to download the logged data or upload the A-GPS EPO data.
*Connect to Laptop via USB cable to work as a wired GPS receiver.

Built-in Auto Gear function

Log time interval will be changed according to the speed detected by the Device.
Speed for each time interval can be programmed by the provided software.

d. Product Specification

General

Environmental

GPS Chipset

MTK 3329

Operating

-10°C to +60°C

Frequency

L1, 1575.42MHz

Storage

-20°C to +80°C

C/A Code

1.023MHz chip rate

Charging

-10°C to +45°C

Channels

66-CH for tracking

Relative Humidity

20% to 80% non-condensing

Antenna

Built-in patch antenna with LNA

Power

Datum

WGS-84

Charging time

1.5hrs (Typical)

Performance Characteristic

Operation Time

11 hours

Position

Without aid: 3.0m 2D-RMS

Protocol

Accuracy

<3m CEP(50%)without SA(horizontal)
DGPS(WAAS,EGNOS,MSAS):2.5m

NMEA-0183 (V3.01) - GGA, GSA, GSV, RMC (default)
Data bit: 8, stop bit:1 (Default), Baud rate: 115200

Time

50 ns RMS

Log data

Velocity

Without aid:0.1m/s,
DGPS(WAAS,EGNOS,MSAS):0.05m/s

RCR, Date, Time, Fix valid, Latitude, Longitude, Altitude,
Speed, Heading

Cold/Warm/Hot 35/33/1 sec, average

Physical

Dynamic condition

Dimension

46 x 32 x 14.7mm

Altitude

<18,000m

Weight

22g

Velocity

<515m/sec

Others

Acceleration

4G

Certification

CE / FCC / C-tick

V1.0

Advertising
This manual is related to the following products: