Transystem 860Lite - Manual (Page 12)

2.2 Getting Started
Please follow the procedure step by step.
Step 1 Charging Your Battery
To charge your 860Lite, you have to plug your USB cable into the power source.
Charging time is about 1 hour and you can charge from PC/ Laptop’s USB HOST or
from cigarette-lighter in car.
For the 1st time you use the 860Lite, please charge battery until it is full. (The green
LED is off) The LED that represents the battery is the left-most battery icon (shown in
below).
- If the battery LED is red, that means battery power is critically low.
Please charge immediately.
- If the battery LED is green, which means battery is charging now.
- If the battery LED is off, which means battery is fully charged.
12