Transystem iGPS-M Pro - Manual (Page 7)

iGPS-M Pro USER’S MANUAL
7
Interface
1. PS2 interface
As shown in the illustration on the right, the length of the wire on iGPS-M Pro
receiver is 2 meters. There is a PS-2 connector for the connection to PC/Lap top
or handheld device. The pin assignment is shown below.
1.1 PS2 female cable definition
Signal Name
Pin
RS-232
1 RS232 TX
2 +5VDC
3 NC
4 Ground
5 1 PPS (optional)
6 RS232 RX
2. USB interface