TVLogic LVM-247W - Manual (Page 18)

18 Multi Format LCD Monitor
●
HD DISPLAY MODE
- Used to control the display ratio of HD mode.
Available values are 16:9, 1.85:1 and 2.35:1.
●
TIME CODE ENABLE
- Used to display the Time Code.
- Available modes are VITC, LTC and OFF.
●
ORBITER CIRCUIT
- Used to prevent image sticking effect on LCD
Panels when signal input is used. The user
may decide number of pixels to move.
- The number of pixels should be within range
between MIN(0) and MAX(100). Moving speed
is 10 minutes per one pixel line.
●
SCREEN SELECT
- Used to control the individual screens(1 or 2)
or full screen (both) in PBP Mode.
- Screen selection order: ALL SCREEN ->
SCREEN 1 -> SCREEN 2
- For easy screen selection, use [CHROMA/
PHASE/SCREEN SEL] button in the front panel.
●
BORDER COLOR
- Used to select the border line color between
the screens in PBP Mode.
- Available values are WHITE, GRAY, BLACK,
RED, GREEN and BLUE.
●
BORDER THICKNESS
- Used to select the thickness of the border
lines the screens in PBP Mode.
- Set value range in pixel 0 ~ 7.
●
CLOSED CAPTION
- Used to select Closed Caption.
- Available modes are OFF, 708, 608(LINE21),
608(ANC) OP47.
* 608 : CEA-608-B, 708 : CEA-708-C standard
display only
●
608 CHANNEL SELECT
- Used to select Closed Caption 608 channel.
- Supports CC1~CC4.
●
708 CHANNEL SELECT
- Used to select Closed Caption 708 channel.
- Supports SERVICE 1~SERVICE 6.
[4] DISPLAY
5. Menu Operations
LVM-247W SDI A
HD DIPLAY MODE
TIME CODE ENABLE
ORBITER CIRCUIT
SCREEN SELECT
BORDER COLOR
BORDER THICKNESS
CLOSED CAPTION
608 CHANNEL SELECT
708 SERVICE SELECT
16:9
OFF
OFF
ALL SCREEN
WHITE
1
OFF
CHANNEL 1
SERVICE 1