Zektor SoloCAT™ HD User Manual
Page 4
Because the SoloCAT HD
™ is HDMI 1.4 compatible it allows
you to take full advantage of the new technology by supporting
much higher resolutions than 1080p or 1440p including 2k
(2048x1080p) and 4k (4096×3072) resolutions. Future
versions of this device will add the capability for Ethernet data
channel, allowing other HDMI 1.4 enabled devices to share a
network connection for internet connectivity. Additionally for
future versions, the audio return channel which will send the
audio signal back from the display to a receiver or other audio
device.
Since the SoloCAT HD
™ has bi-directional IR, it is the perfect
device for multi-room applications and third party control
systems. With bi-directional communication from a remote
control or control system, commands can be sent from the
remote location back to the main equipment center or the other
way around.
Note: The maximum usable distance depends on the quality
and characteristics of the cables. Higher resolutions and longer
transmission distances work better with low skew cables
(<25ns/100m) for the best performance. Unshielded Cat5e/6
with metal RJ-45 connectors and 568-B termination will provide
best results.
For more information about HDMI over HDBaseT technology
you can vis
1. Specifications
HDMI compliant to v1.4a
3D capable
HDMI Connector 19 pin type female connector
HDMI Source Input Port 1
HDMI Sink Output Port 1
Source Port Connector Standard 19 pin HDMI