Zilog Z80195 - Manual (Page 2)

UM951800100
WARNING:
Follow the precautions listed below to avoid permanent damage to hardware.
I. Always use a grounding strap to prevent damage resulting from electrostatic
discharge (ESD).
II. Power-Up Precautions
1. Power-up the PC (or dumb terminal) and ensure that it is running properly.
2. Load the Z80185 Source Diskette.
3. Apply power through connector P1 on the 185/195 board.
III. Power-Down Precautions
When powering down, follow this procedure in the precise order shown below:
1. Quit the monitor program.
2. Power-down the PC.
3. Remove power from the 185/195 board.
Electrical Safeguards