Zg_restore – Zilog EZ80F91GA User Manual
Page 62
ZGATE Shell Command Reference
UM024502-1012
50
ZGATE Embedded Security Development Kit
User Manual
zg_restore
Syntax
zg_restore
Description
The
zg_restore
command deletes the
zg_rules.usr
file (if present) from the root
folder of the Zilog File System (if used). As a result, the default configuration settings in
zg_rules.def
(if present) are restored in the root folder of ZFS (if used) or the compile
time configuration settings in the
ZGATE_Conf.c
file that are linked to the ZTP applica-
tion. ZGATE will use the default configuration the next time it is restarted. The device
must be restarted for this change to take effect.
If ZFS is not enabled, this command does nothing.
Example
[ZTP EXTF:/]>zg_restore
ZGATE restored to factory default configuration. Reboot now to
begin using the default config.
[ZTP EXTF:/]>