Adtec digital EN-30 (version 1.02.02) Quick Start - Manual

Quick View Status
Quick Start Guide
Thank you for your purchase of the Adtec
EN-30 Encoder/Modulator. This product is sold
with one or two encoder modules and with optional modulator hardware packages.
Some configurations may differ from the unit you have purchased if there is only
one encoder module installed. If you purchased this product without a modulator,
please disreguared settings noted with an astericks.
Adtec Digital US Sales +1-615-256-6619 International Sales +1-904-394-0389 www.adtecdigital.com 2014 Adtec Digital
Dual DSNG Encoder / Modulator
Front Panel Menus:
Use Mode Button to move
through top layer menus.
Use arrows for navigation
in submenus.
SELECT
MODE
Use select to enter into edit
mode and enter to
save selection.
Special Keys:
Use the F2 button as a decimal.
F2
ENTER
EN-30
Video
Off - No Video is detected
On - Video is detected
Encode
Off - Device is not encoding
On - Device is encoding
AVC
Off - MPEG2 module installed
On - MPEG4 (H.264) module
installed
HD
Off - Video Input is SD resolution
On - Video Input is HD resolution
A1 - A4
Off - Audio mode set to OFF
On - Encoding or Passthru audio
Alarm
Off - No system alarms
On - System alarm
BISS
Off - Encryption config is OFF
On - Encryption config is ON
Link
Off - No network detected
On - Connection active
Busy
Off - No network activity
On - Network traffic present
Reset:
Should you need to reset your
device, you can do so via the front
panel by pressing the MODE, ESCAPE
and RIGHT ARROW keys
simultaneously.
Units ship with the front panel
logged in by default. If you become
logged out and are prompted for a
password, use the following key
sequence for access.
Press <Select> when panel displays
‘User Login -- logged out’
Press <Up arrow>
Press <Select>
Press <Enter>
Press <Right arrow>
Press <Enter>
LED Status
Bitrate Type
Audio 1: 1 - 4
VID: 0309 AUD:1: 0257 2: 0258 3: 0259 4: 0260
VID: 0308 AUD:1: 8180 2: 8181 3: 8182 4: 8183
Video1 PID Audio1 PIDs 1-4
For information on the core systems of the encoder,
use the down arrorw on the front panel to scroll
through these quick view menus.
Encoder Status TMR Auto Fill Encryption
Service2 ID Service2 Name Service2 Provider
SVC1: 00003 “AdtecHDTV1” Adtec Digital 1
SVC2: 00004 “AdtecHDTV2” Adtec Digital 2
1:MU 384k 2:MU 384k 3:MU 384k 4:MU 384k
1:DD 192k 2:DD 192k 3:MU 384k 4:MU 384k
TSoIP 1 - 4
*Modulator Status Mod FEC Power Roll Off
Video Bit Rate CODEC Chroma
1: SEND ON BUR GIGE 3: SEND OFF OFF GIGE
2: SEND ON OFF GIGE 4: OFF OFF OFF GIGE
CAS System
Video
Audio VBI
Input 1: Resolution Frame Rate Source Mode
Input 2: Resolution Frame Rate Source Mode
RES1: 1920x1080 25i INP: SDI MODE: AUTO
RES2: 720x480 59p INP: COMP MODE: SD
VRT1: 15000000b/s COD: MPEG2 CHR: 422
VRT2: 18242000b/s COD: H.264 CHR: 420
RTP FEC Status Connector
TX: Enable 32APSK_9/10 Pwr: -30dB RO: 25%
Freq: 1291MHz DVB-S2 Sym: 15.00Ms Pilot: ON
Frequency Mode Symbol Rate Pilot
Services *RF Tx IP Tx Video Audio PIDS VBI Profile CAS System
Source
Closed Cap.
Select
Save
Delete
Login
Duration
Backlight
Network Menu
Time Menu
NTP Menu
Alarm
SNMP Menu
COM2
Feature Menu
Name
Firmware
Transmit
Type
Mode
Local Oscillator
Uplink Freq
Frequency(MHz)
Power(dBm)
Spectrum Invrsn
Fec Frame
Roll Off
Pilot
Rate Priority
Symbol Rate
Interface Rate
Carrier Mode
10 MHz Clock
Clock Comb.
<< Ch1 - Ch2 >>
PMT PID
PCR PID
Video PID
Audio 1 PID
Audio 2 PID
Audio 3 PID
Audio 4 PID
Teletext PID
AMOL PID
VITC Mode
VITC PID
Splice Mode
Splice PID
Model Indicators:
No modulator
IF/LB/10M modulator
There are 2 different encoder modules available for the EN-30 and the unit
can be ordered with either or both:
VE1 - MPEG2
VE2 - MPEG4
Video2 PID Audio2 PIDs 1-4
Audio 2: 1 - 4
Bitrate Type
Video Bit Rate CODEC Chroma
Service1 ID Service1 Name Service1 Provider
ENCODING: 38.810Mb/s A/F: OFF CAS:BISS_1
TSI: 00001 SVC1: ON SVC2: OFF
Transport Stream ID Service 1 Service 2
<< 1 - 4 >>
Mode
IP Tx Mode
Tx IP Address
Tx Port
Tx GW Address
DVB per IP
RTP
FEC Mode
FEC L
FEC D
FEC TOS bits
Type of Service
TTL
Tx Connector
Service Select
Mux Rate Mode
Multicast Rate
ENC1 ENC2
<< 1 - 2 >>
Surround Mode
<< 1 - 4 >>
Input
Mode
Type
Rate
Level
Sync
Format
IFB
SDI Pair
SDI Clock Source
ECC
SDI Audio Grp.
REMUX: ACTIVE PROGRAMS: 7
INPUT: 038.963Mb/s CAPACITY: 040Mb/s
ASI Remux Status Programs on Input
Input Data Reserved Bandwith
ENCODING:20.000M A/F:ON CAS:BISS_1
TSI:00001 SVC1:ON SVC2:ON
ENCODING:20.000M A/F:ON CAS:BISS_1
TSI:00001 SVC1:ON SVC2:ON
Mode
Clear SW
Encrypted SW
User ID 1
User ID 2
EN-30
Encode Video AVC HD
A1
A2
A3
A4
Busy Link
Alarm BISS
Video Encode AVC HD
A1
A2
A3
A4
Dual MultiCODEC
Encoder/Modulator
TS Mux Rate
Autofill
Tables
TSID
ASI Mode
ASI Remux
<< Ch1 - Ch2 >>
Active
Service Name
Svc Provider
Program #
Logical Ch #
Bars,Tones,ID
<< Ch1 - Ch2 >>
Input
SDI Mode
Chroma
Video Rate
Aspect Ratio
AFD
GOP Type
GOP Structure
GOP Size
Fault Mode
Fault Resolution