Adtec digital RD-60 (version 1.13.02) Quick Start - Manual

Quick View Status
Quick Start Guide
Thank you for your purchase of the Adtec RD-60 Receiver/Decoder. This
product is sold with optional demodulator hardware packages. Configurations and
indicators relevant to those add-on package are noted here. If you purchased this
product without a demodulator, please disreguard settings noted with an asterisks.
Adtec Digital US Sales +1-615-256-6619 International Sales +1-904-394-0389 www.adtecdigital.com 2015 Adtec Digital
Integrated MultiCODEC Receiver/Decoder
Front Panel Menus:
Use Mode Button to move
through top layer menus.
Use arrows for navigation
in submenus.
SELECT ENTER
MODE
Use select to enter into edit
mode and enter to
save selection.
RD-60
Decode
A1 A2 A3 A4
Alarm BISS
Busy Link
IP
RD-60
MultiCODEC
Receiver / Decoder
Lock 2
Lock 1
ASI RF
Bars
IP Out
A5
A6
A7
A8
SELECT
1 2abc 3def
5jkl 6mno
7pqrs 8tuv 9wxyz
0
4ghi
F1 F2
ENTER
ESCAPE
MODE
Decode
Off - Decoder is idle
On - Decoder is active
ASI/IP/RF
Off - No services detected
On - Services detected
Lock 1 / Lock 2
Off - Tuner is not locked
On - Tuner is locked
IP Out
Off - Not functional
On - Not functional
Bars
Off - B/T/ID options are disabled
On - B/T/ID are enabled
A1 - A8
Off - No Audio Decoding
On - Audio Decoding
Blinking - Fail to decode or pass
audio
Alarm
Off - No system alarms
On - System alarm
BISS
Off - Decryption config is OFF
On - Decryption config is ON
Busy
Off - No network activity
On - Network traffic present
Link
Off - No network detected
On - Connection active
Reset:
Should you need to reset your device, you can do
so via the front panel by pressing the MODE,
ESCAPE and RIGHT ARROW keys simultaneously.
LED Status
Type Bitrate
Audio 1-8
Audio 1:11300 2:11400 3:11500 4:11600
PIDS 5:11300 6:11400 7:11500 8:11600
Audio PIDS 1- 8
For information on the core systems of the IRD, use
the down arrorw on the front panel to scroll through
these quick view menus.
Decoder Activity TMR Encryption
Service ID Service Name Service Provider
DECODING ASI TMR:20.000M CAS:Free to Air
SVC: 00001 “Serv. Name” “Serv. Provider”
1:MU 384k 2:MU 384k 3:MU 384k 4:MU 384k
5:MU 384k 6:MU 384k 7:MU 384k 8:MU 384k
Input Mode/FEC Rcv Level Link Margin
Lock Status Type Symbol Rate Eb(s)/No
RF1 32APSK9/10 Lvl: -52.0dB LMar:20.5dB
Locked DVB-S2 Sym:29.970Ms Eb/No:29.8dB
RTP Detected RTP Error Count Buffer
FEC Detected FEC Packet Loss FEC Corrections
RTP: Y RTP-Err: 1234567 Buffer:1234ms
FEC: Y FecLoss: 1234567 FecCorr: 1234567
DECODING ASI TMR:20.000M CAS:Free to Air
SVC: 00001 “Service Name” Service Provider
Special Keys:
Use the F2 button as a decimal.
F2
The two Gain settings
only apply to RD60-PRM
units manufactured prior
to 03/12 with special
firmware. Units
manufactured after this
date handle these
setting automatically.
CODEC Chroma Bit Depth Delay Mode
Video Rate Resolution Frame Rate
COD: H.264 CHR: 422 BITD:08 DLYM: NORMAL
VRT: 18.012Mb/s RES:1920X1080 FR:59i
Video PID PCR PID PMT PID Aspect Ratio
VID:441 PCR:441 PMT:440 ARA:16X9
Units ship with the front panel
logged in by default. If you become
logged out and are prompted for a
password, use the following key
sequence for access.
Press <Select> when panel displays
‘User Login -- logged out’
Press <Up arrow>
Press <Select>
Press <Enter>
Press <Right arrow>
Press <Enter>
CAS System Video
Output Menu
Genlock Menu
Audio VBI IP Rx
TimeCode Menu
Teletext Menu
Services
Select Service
Select First
RF Rx*
STD
Mode
Clear SW
Encrypt. SW
User ID 1
User ID 2
<< RF1 - RF2 >>
Tuner Active
Local Oscillator
Manual LO
Downlink
L-Band
Mod. Type
Mod. Mode
Symbol Rate
Aquisition Range
Roll Off
Pilot
LNB State
LNB Polarity
LNB Tone
Login
Duration
Backlight
Network Menu
Time Menu
NTP Menu
Alarm Menu
SNMP Menu
COM2
Name
Firmware
Feature Menu
ASI RF1 RF2 IP
AFD Menu
CC Menu
RF Rx*
PRM & ADV
Select Tuner
Local Oscillator
Manual LO
Downlink
L-Band
Mod. Type
CCM Mode
Mod. Mode
Symbol Rate
Acquisition Range
Roll Off
Pilot
Fec Frame Type
RF Gain
(PRM Only)
BB Gain
(PRM Only)
LNB Menu
Rx IP
Rx Port
SSM Address
Connector
Latency
Time Out
Error Rec.
<< AUDIO 1-8 >>
Audio PID
Dolby D Mode
SDI Matrix
ANALOG VOL.
(Audio 1-2 only)
Offset
Dolby E Line TS Out Decrypt
RF Rx*
LB
<< RF1 - RF2 >>
Tuner State
Downlink
Local Oscillator
Manual LO
L-Band
Acqusition Range
S2X Rolloff
LNB Polarity
LNB Tone
Modulation Type
Symbol Rate
ISI
RF Stats
Model Indicators:
Premium demodulator (PRM)
Advanced demodulator (ADV)
L-Band demdulator (LB)
Standard demodulator (STD)
No demodulator
Audio Assign Order
Audio Sync Mode