Adtec digital mediaHUB-HD 422 (version 1.01.10_M_2) Quick Start - Manual

1920x1080 29i 33.77M
1DD 192K 2DD 192K 48
Front Panel Status
Video Resolution Frame Rate Video Bit Rate
Audio Input 1 & 2 Sampling Rate
Units ship with the front panel
logged in by default. If you become
logged out and are prompted for a
password, use the following key
sequence for access.
Press <Select> when panel displays
‘User Login -- logged out’
Press <Up arrow>
Press <Select>
Press <Enter>
Press <Right arrow>
Press <Enter>
Quick Start Guide
Getting Started
Thank you for your purchase of the Adtec mediaHUB-HD 422 Encoder.
This Multi-CODEC Encoder supports both MPEG 2 and MPEG 4 AVC standard and
high definition encoding at 420 and 422 profiles. Further instructions are available
via the manual integrated into the on-board software. You can view it by looking
for the HELP tab once your unit is powered up and you are connected to the
web-application. See back for more details. This manual and the most recent
firmware are available on our support website, www.adtecinc.com. Advanced users
can also find direct API command help as part of the on-board web application.
Control
Control Mode Off
Control Detected/Remote Mode
Control Detected/Local Mode
Alarm
No Encoder Alarm
Encoder Alarm
MP2/AVC
Encoding MPEG 2
Encoding MPEG 4 AVC
420/422
Encoding 4:2:0 Chroma
Encoding 4:2:2 Chroma
Encode
Not Active
Pre-rolling
(Studio Encoding)
Encoding
Transition
(Encoding to Idling)
Video
No Video (Audio Only)
Video Present
Not Supported
No Video Present
Resolution
Standard Definition (NTSC / PAL)
1080i HD
720p HD
Audio 1 - 4
Audio Not Enabled
Audio Enabled
Decode
Not Active
Decoding
CDE/ASI
Confidence Decoding
ASI Recieving
Front Panel LEDs:
System LED Status
Power
Power is OFF
Power is ON
Alarm
No System Alarm
Minor Alarm
Major Alarm
Link
No Link Detected
Link Active
Busy
No Network Traffic
Network Traffic Present
Aux (Not Used)
Multi-CODEC HD 422 Encoder TM
System Decoder
Encoder
Video
Encoder
Audio
Transmit PID Table Profile
Login
Duration
Network
Time
NTP
Alarm
Mirror
COM2
Firmware
Table
VBI Source
Closed Cap.
Service Name
Load
Save
Front Panel Menus:
Use Mode Button to move through top layer menus.
Use arrows for navigation in submenus.
Use select to enter into edit mode and enter to save selection.
Encrypt.
Mode
Clear Word
Encrypt Word
User ID 1
UserID 2
Mux Rate
Vid. AutoFill
IP Destinations 1-4
Resolution
Standard Definition
1080i HD
720p HD
PCR
Prog. No.
Map PID
Vid. PID
Aud.1 PID
Aud. 2 PID
Aud. 3 PID
Aud. 4 PID
AMOL
Splice
VITC Mode
VITC PID
Sample Freq.
A1 A2
A3 A4
Sync
Input
Mode
Type
Bitrate
Volume
Status
Conf. Decode
Auto Res.
Display
DVB-ASI Menu
Aud. Track
SDI Aud. Matrix
Status
Rate
CODEC
Chroma
Input
GOP
GOP Str.
GOP Size
SDI Pass
Latency
Adtec Digital Technical Support: 615.256.6619 www.adtecinc.com 06.28.10