Aervoe Thermoelectric Cooler - Manual (Page 2)

Max Burton ® Thermoelectric Cooler/Warmer #6983
IMPORTANT WARNINGS & SAFEGUARDS
Read all Instructions before use. Failure to do so can cause personal injury or property damage.
•
Never operate the unit with a frayed power cord or damaged 12V plug. Do not operate if it malfunctions in
any way.
• Not intended for use in severe weather. Do not submerse unit or power cord in water or other liquids. Do
not spray with water or use pressurized water to clean the unit. Use only soap and water and avoid direct
contact with the cooling fan and ventilation openings.
• Not intended for use in ambient temperatures above 120°F (49°C) or below 32°F (0°).
• Use caution when operating around children.
• Never block or place objects inside of the air intake or cooling fan that can block airflow.
• Only use for specified purposes with a 12V DC power source rated for at least 6A.
• Only place food, liquids, medicine, ice, or ice packs inside of the unit. To avoid mildew, do not store anything
for long periods of time.
• Do not operate the unit upside down or on its side as damage to thermoelectric elements can occur.
• Avoid switching the main power switch abruptly from Cool to Warm. Place unit in the off position and wait at
least 15 minutes before operating again.
• There are no user serviceable parts, other than the replaceable fuse as noted in the instructions. Any repairs
attempted by the user would void the warranty. Contact Aervoe Industries, Inc. for assistance.
PARTS IDENTIFICATION
12V Power Cord
12V Plug
Handle
Mode Switch (Cool/Off/Hot)
with Power Indicator
Vertical Divider
Vents
Cooling Fan